28-12-2016:
Crane: Main actuators ready! I went with the concens Con35 version! See more at the crane section today!

23-10-2016:
Crane: New page about the microprocessor, accelerometer and load cell -system that makes up the watchdog! Look under the crane section today!

27-08-2015:
Crane: Work on pause for a little while.

08-06-2015:
MAN: The MAN custom 8x4 now complete! Please enter the MAN section for many new images.

25-05-2015:
MAN: Finally got it painted in my favorite color, and assembly going! Next: Electronics!

10-05-2015:
MAN: Push-pull completed!

09-05-2015:
New car: I have added my (now sold) MEX Land Rover D90.

26-04-2015:
MAN: Utility rack done, and chassis ready for final assembly! Please visit the MAN section for details.

19-04-2015:
Crane: A new 20' frame for the support plates now done! Fits on the container trailer.

16-03-2015:
New, fast-track project: Custom 8x4 MAN TGX 26.540 support vehicle. Scale 1:14. (Before returning to the crane full-time..)

17-02-2015:
Web: Moved to a new hotel, so downtime should be over! Thank you for your patience.

02-02-2015:
Crane: Outrigger controller done! Please see the dedicated page in the crane section for details!

05-01-2015:
CNC has broken down, so some work is delayed.

23-11-2014:
Crane: Outriggers finally done! Please visit the crane section for an update.

09-10-2014:
Crane: New, great brochure added, see "Crane specifications, real vs. model!"

27-09-2014:
Crane: Pictures of the markings from www.rc3d.dk! See the bottom of "Finished carrier" in the crane section.

07-09-2014:
Crane: Huge chapter added: "RC configuration / electronics"!!

8/20/2014:
Crane: Work on the crane finally resumed, after a very busy summer. An update including images will follow shortly.

7/31/2014:
New in the garage: 1:10 Tatra 8x8 truck by Capo! Please visit the dedicated section..

6/1/2014:
Crane: Assembly started! Two years of work come together. Please see the crane's section and the "Finished carrier...." page.

5/16/2014:
Crane: Support frame A done! Holds 500t hook, extra wire and more.

5/3/2014:
Crane: Slewing bearing done! Please see more under "Slewing ring (Turntable)" in the crane section!

2/22/2014:
Crane: New section added: Support equipment! First items displayed as well..

10/3/2013:
Crane: My first ever 3D part on the CNC now done: Torque converter 4:1 in aluminum! See "Cardans, steering, gearboxes, main motor "

7/11/2013:
Submarine (SSBN 737) decommissioned and sold to a very proud, new owner.

11/2/2012:
Welcome to the new web! :-) Please select the model of interest below, and click thumbs within each models article to see large size image. Enjoy..